Resins and Composites

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Composites are made up of individual materials such as fibres to provide a combined reinforcement solution for weight, strength or cost reduction. The different fibres impart their special mechanical and physical properties to enhance matrix properties and produce material properties unavailable from the individual constituent materials. An example of where fibre composites have proven to be successful is in the manufacture of brake pads where a more expensive fibre has been partially replaced by a less expensive material without a significant reduction in performance.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron powders are used in varnishes, mid range in epoxy resins and high micron size in paints.

Goonvean Fibres offers a range of micronised natural and synthetic powders. Characterised by their controlled particle sizes, they are specifically designed for paint, surface coatings, grouts and epoxy putty to ensure a uniform texture on the finished product.

Natural ground olive stones are odorless organic materials ground to fine flours, granules and pits. These inexpensive natural materials are used in a variety of applications such as paints, cosmetics and non slip coatings.

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron size are used in varnishes, mid range in epoxy resins and high micron size in paints.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk