Advanced search

Tel: +44 (0)1404 44194 Email: enquiry@goonveanfibres.co.uk

Powder and Fibres for Paints and Coatings, heavy duty industrial flooring, car parks ,outdoor and indoor structured paints are among some of the applications using fibres and powders

Paints and Surface Coatings

Fibers for coating systems

Goonvean Fibres offers a range of short cut synthetic and natural fibres, flocks and powders for use in the paints and surface coatings industry. These short cut materials are used for texturising and anti slip applications in e.g. floor and marine paints and provide excellent impact protection.

Anti-Slip Coatings

Anti-Slip Floor and Deck Coatings

Anti-Slip CoatingsGoonvean Fibres offers a range of short cut polyethylene, polypropylene and natural powders for use in anti-slip coatings. These are used for slip prevention on swimming pools and surroundings, marine paints for treating ship decks, oil platforms, car park surfaces and other heavy duty industrial flooring.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron powders are used in varnishes, mid range in epoxy resins and high micron size in paints.

Goonvean Fibres offers a range of micronised natural and synthetic powders. Characterised by their controlled particle sizes, they are specifically designed for paint, surface coatings, grouts and epoxy putty to ensure a uniform texture on the finished product.

Natural ground olive stones are odorless organic materials ground to fine flours, granules and pits. These inexpensive natural materials are used in a variety of applications such as paints, cosmetics and non slip coatings.

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron size are used in varnishes, mid range in epoxy resins and high micron size in paints.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Coatings

Textured Coatings

CoatingsGoonvean Fibres offers a range of materials that improve slump and sag resistance of thick coating films especially on vertical surfaces. Polyethylene and cellulose flocks also add structure to paint and coating films to give better coverage on corners and sharp angles, as well as improving the viscosity of solvent-based bitumen coatings.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron powders are used in varnishes, mid range in epoxy resins and high micron size in paints.

Goonvean Fibres offers a range of micronised natural and synthetic powders. Characterised by their controlled particle sizes, they are specifically designed for paint, surface coatings, grouts and epoxy putty to ensure a uniform texture on the finished product.

Natural ground olive stones are odorless organic materials ground to fine flours, granules and pits. These inexpensive natural materials are used in a variety of applications such as paints, cosmetics and non slip coatings.

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron size are used in varnishes, mid range in epoxy resins and high micron size in paints.

Natural fibres and fibre flocks such as cotton, hemp and other cellulosic-based fibres are increasingly used to reinforce products in a growing number of applications. Many global companies looking for less reliance on oil based synthetic flocks where precision cut lengths are less critical are investigating the use of an environmentally acceptable alternative.

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Viscose rayon is most commonly used in the production of paper and packaging but has also found applications in filtration, hygiene and oil well drilling. The fibre has an exceptional dye affinity making it invaluable for use in speciality papers such as bank notes. As the material is 100% biodegradable it is globally accepted for use in applications which demand environmental control.

Aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Acrylic fibre flock is a polyacrylonitrile fibre used as an alternative to asbestos for the manufacture of brake pads and clutch plates. The fire resistant properties of the material also make it an ideal choice in intumescent applications such as paints and sealants.

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Polyacrylonitrile fibres are used as reinforcement in a variety of applications including paints, roof and floor water proof coatings, adhesives and sealants. These short cut fibres are ideal for crack bridging and covering uneven surfaces.

Goonvean Fibres offers a short cut 17 decitex precision cut fibre that is used in applications where fibre strength and resiliance are required. As the material is resistant to high temperature and does not burn it is commonly used as an intumescent material in adhesives, resins and paints.

Floor Paints

Floor Paints

Floor PaintsGoonvean Fibres offers Polypropylene and Polyethylene powders that are used as formulation additives, thermo-adhesives, and surface protection coatings in plastic processing, aerospace, batteries, textiles, cosmetics, paints, home and garden, oil & gas and safety equipment. Olive Stone Flours are recycled organic materials that have a lower density, are less abrasive and have low ash content making them suitable for use in oil & water well drilling, putties and fillers in paints, non slip surfacing, decorative design and resin castings.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron powders are used in varnishes, mid range in epoxy resins and high micron size in paints.

Goonvean Fibres offers a range of micronised natural and synthetic powders. Characterised by their controlled particle sizes, they are specifically designed for paint, surface coatings, grouts and epoxy putty to ensure a uniform texture on the finished product.

Natural ground olive stones are odorless organic materials ground to fine flours, granules and pits. These inexpensive natural materials are used in a variety of applications such as paints, cosmetics and non slip coatings.

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron size are used in varnishes, mid range in epoxy resins and high micron size in paints.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Flooring

Flooring

FlooringAcrylonitrile (Acrylafloc?) is used to manufacture a fast drying acrylic floor paint for crack bridging where the floor surface is uneven. It is also used in sub floor adhesive coatings and roof sealants to provide a flexible but resilient coating that is, in the case of intumescent fibres, capable of resisting high temperatures. Fibres are widely used in intumescent paints and sealants to provide additional protection during fires; this is achieved by fibre expansion in joints and painted steel structures under extreme temperatures.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Acrylic fibre flock is used in fire resistant paints for safety reasons and improved coverage. Under high temperatures the fibre expands into a foam like material without burning, this expanded foam bridges gaps and cracks that resist the spread of fire and also helps to prevent smoke transfer. Addition of fibre depends on gap to be covered and burn time requirement e.g. 5% for 30 minutes and 10% for 60 minutes depending on the other materials in close proximity i.e. untreated wooden doors will be breached faster than sealed frames etc

Goonvean Fibres offers a fine ground regenerated cellophane flock for use in flooring applications. The product has good anti - static properties, provides a good level of gloss and transparency and has a good dye affinity.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Polyacrylonitrile (PAN) is a synthetic resin prepared by the polymerisation of acrylonitrile. A member of the important family of acrylic resins, it is a hard, rigid thermoplastic material that is resistant to most solvents and chemicals, slow to burn, and of low permeability to gases. PAN fibre is therefore used in many different applications where these attributes are specified.

Goonvean Fibres recommends modacrylic fibre for applications where a combination of softness, strength, resilience, and dimension stabilty are demanded. Modacrylic fibres can be easily dyed, show good press and shape retention, and are quick to dry. They have outstanding resistance to chemicals and solvents.

Polypropylene (PP) is a thermoplastic polymer used in a wide variety of applications including packaging, textiles and automotive components. It is rugged and unusually resistant to many chemical solvents, bases and acids making it an ideal material for use in Lead Acid Batteries and concrete.

Goonvean Fibres offers a short cut 17 decitex precision cut fibre that is used in applications where fibre strength and resiliance are required. As the material is resistant to high temperature and does not burn it is commonly used as an intumescent material in adhesives, resins and paints.

Industrial Paints

Industrial Paints

Industrial PaintsShort cut fibres, flocks and powders are used as fillers and texturising agents in a variety of industrial paints and coatings. Applications include anti-corrosion corrosion primers and paints, steel and concrete coatings, crack bridging and water proofing. Product selection will depend on the end use.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Natural ground olive stones are odorless organic materials ground to fine flours, granules and pits. These inexpensive natural materials are used in a variety of applications such as paints, cosmetics and non slip coatings.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Intumescent Coatings

Fibres & Flocks

Intumescent CoatingsShort cut acrylonitrile fibres and flocks have long been used as additives to intumescent paints & sealants in applications ranging from structural and cast iron steel, wood, plaster board or brickwork fire seals, smoke seals, fire grilles, mastics, filler foams, down lighter covers, pipe collars, duct wrap, cladding seals etc. The fibre provides improved fire resistance helping to control flame spread and fire propagation and in the case of steel structures keeping them below the critical (collapse) temperature.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Acrylic fibre flock is used in fire resistant paints for safety reasons and improved coverage. Under high temperatures the fibre expands into a foam like material without burning, this expanded foam bridges gaps and cracks that resist the spread of fire and also helps to prevent smoke transfer. Addition of fibre depends on gap to be covered and burn time requirement e.g. 5% for 30 minutes and 10% for 60 minutes depending on the other materials in close proximity i.e. untreated wooden doors will be breached faster than sealed frames etc

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Acrylic fibre flock is a polyacrylonitrile fibre used as an alternative to asbestos for the manufacture of brake pads and clutch plates. The fire resistant properties of the material also make it an ideal choice in intumescent applications such as paints and sealants.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Polyacrylonitrile (PAN) is a synthetic resin prepared by the polymerisation of acrylonitrile. A member of the important family of acrylic resins, it is a hard, rigid thermoplastic material that is resistant to most solvents and chemicals, slow to burn, and of low permeability to gases. PAN fibre is therefore used in many different applications where these attributes are specified.

Goonvean Fibres recommends modacrylic fibre for applications where a combination of softness, strength, resilience, and dimension stabilty are demanded. Modacrylic fibres can be easily dyed, show good press and shape retention, and are quick to dry. They have outstanding resistance to chemicals and solvents.

Polyacrylonitrile fibres are used as reinforcement in a variety of applications including paints, roof and floor water proof coatings, adhesives and sealants. These short cut fibres are ideal for crack bridging and covering uneven surfaces.

Goonvean Fibres offers a short cut 17 decitex precision cut fibre that is used in applications where fibre strength and resiliance are required. As the material is resistant to high temperature and does not burn it is commonly used as an intumescent material in adhesives, resins and paints.

Marine Paints

Marine Paints

Marine PaintsShort cut fibres, flocks and powders are used in the manufacture of marine paints to provide anti-corrosion, water resistance, crack bridging and fire resistance in the harshest of environments.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron powders are used in varnishes, mid range in epoxy resins and high micron size in paints.

Natural ground olive stones are odorless organic materials ground to fine flours, granules and pits. These inexpensive natural materials are used in a variety of applications such as paints, cosmetics and non slip coatings.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Metal Paints

Anti-Corrosion

Metal PaintsNatural grits, flours and powders are used as inexpensive fillers and textural aids in the manufacture of metal and anti-corrosion paints. These paints are used in hostile environments such as off shore facilities.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Natural ground olive stones are odorless organic materials ground to fine flours, granules and pits. These inexpensive natural materials are used in a variety of applications such as paints, cosmetics and non slip coatings.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Non-drip gloss

Non-drip gloss

Non-drip glossGoonvean Fibres offers a range of fibres and powders for use in paint applications.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Road Paints

Synthetic powders for road paints

Road PaintsGoonvean Fibres offers polypropylene and polyethylene powders for use in the manufacture of road marking paints. Thermo setting powders are perfect for use in a demanding application where rapid drying and excellent impact resistance are minimal requirements.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron powders are used in varnishes, mid range in epoxy resins and high micron size in paints.

Goonvean Fibres offers a range of micronised natural and synthetic powders. Characterised by their controlled particle sizes, they are specifically designed for paint, surface coatings, grouts and epoxy putty to ensure a uniform texture on the finished product.

Goonvean Fibres offers a range of polyethylene powders that are commonly used in epoxy resins, varnishes and paints. The exact powder micron size will be determined by the end use e.g. lower micron size are used in varnishes, mid range in epoxy resins and high micron size in paints.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

backtotop